440-232-8757  |  info@controllix.com

Case Studies:

Controllix Meets Outdoor Environmental Requirements
A coastal utility procured their first metal enclosed capacitor bank from Controllix Corporation. The customer was accustomed to using open rack style capacitor banks, but a fully welded metal enclosu...
Read More
Existing Equipment Retrofit
A mid-west utility approached Controllix with a request to replace their existing outdoor metal enclosed 34.5kV, 1200A fixed breaker used for the daily switching of a remotely located Controllix 10.8M...
Read More
Factory Energy Savings
A midwest foundry commissioned Controllix for multiple metal enclosed harmonic filter equipment. Each project involved a single stage harmonic Filter with 5th and 11th harmonic...
Read More
Controllix’s Design Versatility Simplifies Multi Site Installation
A large midwestern utility sent an October quote request to Controllix requiring a total of 76 large (6000 and 9000kvar) metal enclosed capacitor banks at 13.8kv. There were 11 equipment designs to ac...
Read More
Installation of 46kV Capacitor Bank:
  A major New England utility installs capacitor banks at various substations to provide voltage support during normal and contingency operating conditions. In certain conditions at the parti...
Read More

This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.

Case Studies

/Case Studies

Controllix Meets Outdoor Environmental Requirements

A coastal utility procured their first metal enclosed capacitor bank from Controllix Corporation. The customer was accustomed to using open rack style capacitor banks, but a fully welded metal enclosure protects equipment during weather related [...]

February 19th, 2016|Categories: Case Studies|0 Comments

Existing Equipment Retrofit

A mid-west utility approached Controllix with a request to replace their existing outdoor metal enclosed 34.5kV, 1200A fixed breaker used for the daily switching of a remotely located Controllix 10.8MVAR capacitor bank. A capacitor switch [...]

February 16th, 2016|Categories: Case Studies|0 Comments

Factory Energy Savings

A midwest foundry commissioned Controllix for multiple metal enclosed harmonic filter equipment. Each project involved a single stage harmonic Filter with 5th and 11th harmonic tuning frequencies. The 11th harmonic filter also included a high pass resistor.  The [...]

February 16th, 2016|Categories: Case Studies|0 Comments

Controllix’s Design Versatility Simplifies Multi Site Installation

A large midwestern utility sent an October quote request to Controllix requiring a total of 76 large (6000 and 9000kvar) metal enclosed capacitor banks at 13.8kv. There were 11 equipment designs to accommodate various substation [...]

February 16th, 2016|Categories: Case Studies|0 Comments

Installation of 46kV Capacitor Bank:

  A major New England utility installs capacitor banks at various substations to provide voltage support during normal and contingency operating conditions. In certain conditions at the particular substation, the voltage levels were unacceptable and it [...]

February 11th, 2016|Categories: Case Studies|0 Comments